不同的生產工藝造就不同類型的無紡布
1、水刺無紡布:是將高壓微細水流噴射到一層或多層纖維網上,使纖維相互纏結在一起,從而使纖網得以加固而具備一定強力。
1, spunlaced nonwovens: high pressure tiny water flow to a layer or multi-layer fiber network, so that fibers intertwined together, so as to strengthen the fabric and have a certain strength.
2、熱合無紡布:是指在纖網中加入纖維狀或粉狀熱熔粘合加固材料,纖網再經過加熱熔融冷卻加固成布。
2, hot metal nonwoven fabric: it refers to fiber or powdery hot melt adhesive reinforcement in the fiber net, and then the fiber net is reinforced by heating and melting to reinforce the cloth.
3、漿粕氣流成網無紡布:又可稱做無塵紙、干法造紙無紡布。它是采用氣流成網技術將木漿纖維板開松成單纖維狀態,然后用氣流方法使纖維凝集在成網簾上,纖網再加固成布。
3, the pulp air flow into the net non-woven cloth: also can be called as dust free paper, dry paper non-woven fabric. It uses airflow net forming technology to break wood pulp fiberboard into single fiber state, and then uses airflow method to make fiber agglomerate on net curtain, and then reinforce the fabric into cloth.
4、濕法無紡布:是將置于水介質中的纖維原料開松成單纖維,同時使不同纖維原料混合,制成纖維懸浮漿,懸浮漿輸送到成網機構,纖維在濕態下成網再加固成布。
4, wet nonwovens: the raw materials are loosened into single fibers in the water medium, and different fiber materials are mixed to make fiber suspension slurry. The suspended slurry is transported to the mesh forming mechanism, and the fibers are further reinforced into cloth under wet condition.
5、紡粘無紡布:是在聚合物已被擠出、拉伸而形成連續長絲后,長絲鋪設成網,纖網再經過自身粘合、熱粘合、化學粘合或機械加固方法,使纖網變成無紡布。
5, spunbonded nonwovens: after the polymer has been extruded and stretched to form continuous filament, the filament will be laid into mesh, and the mesh will be transformed into non-woven fabric through its own adhesion, thermal bonding, chemical bonding or mechanical reinforcement.
6、熔噴無紡布: 其工藝過程:聚合物喂入---熔融擠出---纖維形成-
上一條新聞:無紡布袋定做的常用的款式介紹 下一條新聞:對于定做的無紡布手提袋的設計要考慮什么?