欄目導航
無紡布袋的承重性能
來源:本站 作者:jnjs 日期:2016/7/30 10:11:35 瀏覽次數:100
山東無紡布袋現在用途越來越為廣泛,在許多場合都需要用到無紡布袋,這樣我們就得考慮無紡布袋的承重性能問題。一般的無紡布袋都能承受10kg左右的重量,如果要承受更大的重量,我們應該做以下工藝的改進,這樣就會大大增加無紡布袋的承重性能。
Non woven bags are now used more and more widely, in many occasions need to use non-woven bags, so we have to consider the load bearing properties of non-woven bags. Generally non woven bags can withstand the weight of 10kg, if you want to bear a greater weight, we should do the following process improvement, so it will greatly increase the bearing performance of non-woven bag.
一、盡量使用車縫無紡布袋
One, as far as possible the use of sewing non-woven bags
車縫無紡布袋相比超聲波熱溶無紡布袋的承重性能要強很多。由于熱溶無紡布袋只是通過高溫把無紡布熱粘合在一起,所有的力都會承受在一個熱熔點上,所以熱熔無紡布袋的承重性強并不強。
Sewing non-woven bags bearing the stronger performance than many of the supersonic hot-melt non-woven bag. Due to the thermosol non woven bag just by temperature to the non-woven thermally bonded together and all the force will withstand in a hot melting point, so hot without woven bag loading of strong is not strong.
二、在無紡布袋提手處打叉
In two, non-woven bag handle a fork
無紡布袋在運動過程中絕大多數的力會承受在無紡布袋的手提處四個點上,如果這四個點的承重性能好不易撕裂這樣承重性能會大大加強。因此我們在手提處做打叉處理,這樣提高無紡布袋的承重性能是很有用處的。
Non woven bag in the movement of the vast majority of the force will bear in the non-woven bag of four points on the hand, if the four points of the bearing performance is not easy to tear such bearing performance will be greatly strengthened. So we do a fork in hand handle, so as to improve the load bearing performance of non-woven bag is very useful.
三、手提車到底部或整圈
Three, the mobile car in the end or the whole circle
上面提到普通無紡布袋在運動過程中所以的重心都會承重在手提處的四個點上,如果我們把手提車到袋子的底
Non woven bags are now used more and more widely, in many occasions need to use non-woven bags, so we have to consider the load bearing properties of non-woven bags. Generally non woven bags can withstand the weight of 10kg, if you want to bear a greater weight, we should do the following process improvement, so it will greatly increase the bearing performance of non-woven bag.
一、盡量使用車縫無紡布袋
One, as far as possible the use of sewing non-woven bags
車縫無紡布袋相比超聲波熱溶無紡布袋的承重性能要強很多。由于熱溶無紡布袋只是通過高溫把無紡布熱粘合在一起,所有的力都會承受在一個熱熔點上,所以熱熔無紡布袋的承重性強并不強。
Sewing non-woven bags bearing the stronger performance than many of the supersonic hot-melt non-woven bag. Due to the thermosol non woven bag just by temperature to the non-woven thermally bonded together and all the force will withstand in a hot melting point, so hot without woven bag loading of strong is not strong.
二、在無紡布袋提手處打叉
In two, non-woven bag handle a fork
無紡布袋在運動過程中絕大多數的力會承受在無紡布袋的手提處四個點上,如果這四個點的承重性能好不易撕裂這樣承重性能會大大加強。因此我們在手提處做打叉處理,這樣提高無紡布袋的承重性能是很有用處的。
Non woven bag in the movement of the vast majority of the force will bear in the non-woven bag of four points on the hand, if the four points of the bearing performance is not easy to tear such bearing performance will be greatly strengthened. So we do a fork in hand handle, so as to improve the load bearing performance of non-woven bag is very useful.
三、手提車到底部或整圈
Three, the mobile car in the end or the whole circle
上面提到普通無紡布袋在運動過程中所以的重心都會承重在手提處的四個點上,如果我們把手提車到袋子的底
上一條新聞:無紡布袋軟料和硬料的區別 下一條新聞:無紡布手提袋氣味大是什么原因