普通塑料印品的印刷可選擇聚酰胺油墨

　　普通塑料印品的印刷可選擇聚酰胺油墨，但是聚酰胺油墨一般含有苯類溶劑，而且印成品殘留溶劑相對偏高，用來印刷包裝雪糕、飲料的BOPP膜就不合適。
　　Common plastic printing quality of printing can choose polyamide inks, but polyamide ink generally contain benzene solvent, and relative high finished product residue solvent, used in printing and packaging ice cream, beverage of BOPP film is not suitable.
　　像市場上賣的和路雪雪糕包裝、可口可樂、百事可樂的瓶套標簽印刷都采用醇酯體系的BOOP珠光膜聚氨酯表印油墨。
　　Like to sell on the market and road snow ice cream packaging, Coca-Cola, Pepsi bottle label printing are using alcohol ester system set of BOOP pearly membrane pu table printing ink.
　　其他像洗衣粉包裝要求耐堿，襯衣包裝要求耐滲透，還有一些產品要求耐水、耐凍等等。濟南無紡布袋
　　Like other alkali washing powder packing requirements, shirt packaging requirements penetration resistance, and some products require water resistant, resistant to cold and so on.
　　PVC袋表印油墨  用途不同油墨也有差別。PVC膜因為極性較好，普通的PVC油墨也能印刷，但是對于需要蒸煮類的食品包裝，需采用耐蒸煮的專用PVC油墨。
　　PVC bag table printing ink use different ink also differ. PVC film for polarity is good, ordinary PVC ink can be printed, but for food packaging need cooking class, need special cooking the corrosion resistance of PVC ink.
　　PVC熱收縮里印油墨也應采用專用油墨，因為有些油墨是不耐收縮的。
　　PVC thermal shrinkage in the printing ink also should use special inks, because some of the ink is not resistant to shrink. 
    本文由濟南無紡布袋生產銷售公司整理發表提供，詳情請關注公司網站：http://www.52ylhc.com/