聚四氟乙烯纖維不能制作淋膜無紡布的原因

首先,聚四氟乙烯在制作淋膜無紡布以后,它的摩擦因數很小,纖維基本沒有可用卷曲,很難產生纖維與纖維之間的搭接,即使梳理出了毛網也往往很難進一步將毛網輸送到交叉鋪網機以及在交叉鋪網機中順利折疊成網.
First, PTFE in making non-woven Lin Mo after, its friction coefficient is very small, fiber almost has no available curl, it is difficult to produce the overlapping between the fiber and the fiber, even to tease out the hair net also tend to it is difficult to further hair net transported to cross lapping machine and in Cross shop network machine smooth folding into the net.
其次,在制成淋膜無紡布以后,它很容易在纖維輸送,梳理過程中產生靜電,導致無法連續生產.
Secondly, after the film made of non-woven fabrics, it is very easy in the fiber transmission, the static electricity generated in the process of combing, leading to continuous production.
總體而言,由于淋膜無紡布的特殊性,所以,在生產的過程中對原材料的選擇是非常嚴格的.選用聚四氟乙烯纖維會對生產和使用造成影響,不建議選用.
Overall, due to the particularity of laminating non-woven fabric, so in the production process of raw material choice is very strict. Selection of polytetrafluoroethylene fiber will cause the influence to the production and operation, not recommended for use.
本文來自：山東無紡布袋詳情請點擊：http://www.52ylhc.com
This article from: Shandong non-woven bag details, please click: http://www.52ylhc.com