無紡布根據生產工藝的不同有哪些分類

    1、熱合無紡布：是指在纖網中加入纖維狀或粉狀熱熔粘合加固材料，纖網再經過加熱熔融冷卻加固成布。
　　1, heat-sealing non-woven: refers to the fabric with fibrous or powder hot melt adhesive reinforcement materials, fabric after heating molten cooling reinforcement into cloth.
　　2、水刺無紡布：是將高壓微細水流噴射到一層或多層纖維網上，使纖維相互纏結在一起，從而使纖網得以加固而具備一定強力。
　　2, spunlace nonwoven: high-pressure micro flow injection to a layer or multilayer fiber net, make the fiber tangled together, so that the fabric is strengthened and have a certain strength.
　　3、濕法無紡布：是將置于水介質中的纖維原料開松成單纖維，同時使不同纖維原料混合，制成纖維懸浮漿，懸浮漿輸送到成網機構，纖維在濕態下成網再加固成布。
　　3, wet nonwoven: fiber raw material is placed in a water medium opening into single fiber, at the same time make different fiber ingredients, made from fiber suspension slurry, suspension slurry to the network, fiber under wet condition into a network to reinforce into cloth.
　　4、漿粕氣流成網無紡布：又可稱做無塵紙、干法造紙無紡布。它是采用氣流成網技術將木漿纖維板開松成單纖維狀態，然后用氣流方法使纖維凝集在成網簾上，纖網再加固成布。
　　The non-woven fabric: 4, pulp flow into a network and can be called air-laid paper, dry process of paper making non-woven fabrics. It is the airflow into network technology will open pine wood pulp fiber board into a single fiber state, and then use airflow method makes fiber aggregation in the shade on this network, web reinforcement into cloth.
　　5、熔噴無紡布： 其工藝過程：聚合物喂入---熔融擠出---纖維形成---纖維冷卻---成網---加固成布。
　　5, melt-blown non-woven, its technological process: polymer feeding - melt extrusion - fiber formation - cooling - into a network - reinforcement into cloth.
　　6、紡粘無紡布：是在聚合物已被擠出、拉伸而形成連續長絲后，長絲鋪設成網，纖網再經過自身粘合、熱粘合、化學粘合或機械加固方法，使纖網變成無紡布。
　　6, spun-bonded non-woven fabric: is in polymer has been after extrusio